You can reuse your entire measurement table in multiple techpacks so you don't have to spend time entering the same information over and again.
In this article, you'll learn how you can reuse your measurement section using the libraries:-
Step 1: From your techpack board page, click on this library icon located on the top navigation bar. Your library pane will slide out from the right.
Step 2: Now you will create a new library here to store your measurement cards. To do that, click on this menu option located on the right side of the screen and select Create library.
Step 3: In this pop-up dialogue name your new library and select measurement as the card type that you'll be saving here. Click on the create button.
|NOTE: You need to make sure you select the same type of library corresponding to your card type (sketch, measurement, or materials )|
Step 4: Select your Measurement cards from any techpack and simply drag and drop them into your new library. A pop-up called choose column view comes up .
You can choose all or selected columns of the techpack cards to be moved to your library. You can learn all about it here.
Step 5: Your new measurement cards library is now ready for you and your team members to use in their new or existing techpacks.
To reuse the cards, select the library and drag all or selected cards int any techpacks.
Now that you know how to reuse your measurement section, you can also save your material section and reuse them on other techpacks. Here's how it works.